Novastar DH7512-S LED Receiver Card with 12 HUB75E Ports
Novastar Receiving Card Models:
Armor Series Receiving Card
A10S Plus Receive Card
A9S Receive Card
A9 Receive Card
A8S Receive Card
A8 Receive Card
A7S Receive Card
A7 Receive Card
A5S Receive Card
A5 Receive Card
A4S Receive Card
Standard MRV Series Receiving Card:
MRV206 Receive Card
MRV266 Receive Card
MRV366 Receive Card
MRV328 Receive Card
MRV316 Receive Card
MRV308 Receive Card
MRV336 Receive Card
MRV412 Receive Card
DH Series Receiving Card
DH436 Receive Card
DH418 Receive Card
DH7508 Receive Card
Novastar DH7512-S High Cost Performance LED Receiving Card is a general-purpose receiver card from NovaLCT, which can carry up to 512x512 pixels on a single card (NovaLCT must be v.5.3.1 and above) and supports color management, 18Bit+, point-by-point brightness chroma correction, RGB independent Gamma adjustment, 3D, etc. to improve the display effect and user experience. The DH7512-S adopts 12 standard HUB75E interfaces for communication and supports up to 24 groups of RGB parallel data. The hardware design and software design fully consider the scenarios of user deployment, operation and maintenance, making deployment easier, operation more stable and maintenance more efficient..
Features of Novastar DH7512 LED Receiver Card with 12 HUB75E Ports
·Color Management
·18Bit+
·Point-by-point brightness and chromaticity correction
·Quick bright and dark line adjustment
·3D function
·RGB independent Gamma adjustment
The screen rotates in multiples of 90°
·Mapping function
·Pre-stored screen settings
·Temperature and voltage monitoring
·Cabinet LCD display
·Error detection
·Firmware program readback
·Configuration parameter readback
·Loop backup
·Dual backup of configuration parameters
·Dual program backup
Features of Novastar DH7512-S LED Receiver Card with 12 HUB75E Ports
·Color management
Switch the color gamut of the screen between multiple gamuts to enable more precise colors on the screen.
·18Bit+
Improve the LED display grayscale by 4 times to avoid grayscale loss due to low brightness and allow for a smoother image.
·Pixel level brightness and chroma calibration
Working with NovaLCT and NovaCLB, the receiving card supports brightness and chroma calibration on each LED, which can effectively remove color discrepancies and greatly improve LED display brightness and chroma consistency,allowing for better image quality.
·Quick adjustment of dark or bright lines
The dark or bright lines caused by splicing of cabinets or modules can be adjusted to improve the visual experience. This function is easy to use and the adjustment takes effect immediately.
In NovaLCT V5.2.0 or later, the adjustment can be performed without using or changing the video source.
·Low latency
The latency of video source on the receiving card end can be reduced to 1 frame (only when using modules with driver IC with built-in RAM).
·3D function
Working with the independent controller which supports 3D function, the receiving card supports 3D image output.
·Individual Gamma adjustment for RGB
Working with NovaLCT (V5.2.0 or later) and the independent controller which supports this function, the receiving card supports individual adjustment of red Gamma, green Gamma and blue Gamma, which can effectively control image non-uniformity under low grayscale and white balance offset, allowing for a more realistic image.·Image rotation in 90° increments
The display image can be set to rotate in multiples of 90° (0°/90°/180°/270°).